This kit is for HP Laserjet 1100 owners who have a broken exit sensor.

 

Typically this repair is needed after someone clears a paper jam inside the fuser and finds a black finger from the sensor falls out or breaks off in the process.

 

The printer will no longer print and thinks there is a paper jam constantly.

 

You can look inside the fuser section under the shield where the paper comes through. In the center you will see an open cavity with a finger sticking up. If the finger is missing then your exit sensor is broken off and you need to replace it.

 

This kit will show you how to replace the exit sensor and get your Laserjet 1100 back in action.

This repair will take 30-45 minutes to complete. T

 

he kit includes the following:

HP Laserjet 1100 exit sensor

Detailed video on cd playable on your pc in windows media or realplayer at a minimum that will have your exit sensor installed ready to print in 30-45 minutes.

 

The tools required for the repair:

Small flat blade screwdriver standard

phillips screwdriver

needlenose pliers

computer capable of playing cd to watch repair

 

The video is in WMV format and playable on your Mac or Windows based PC. The WMV format is supported by mediaplayer, VLC Player and Realplayer. Any programs using WMV format should play the videos. The video is spoken in clear english and broken down into short 3-5 minute videos to ensure you do not fall behind. The video and repair skill is designed for a novice with basic handtool skill.