This kit is for HP Laserjet 1300 printers that have a fuser that has major issues such as not heating the paper giving an error light pattern of bad fuser.

This is also for customers who want to rebuild the fuser completely like a shop would do.

This fuser rebuild kit is the best of the best.

You get a new film heater assembly and the pressure roller.

If you have a Laserjet 1300 that is on the fritz due to a burned out fuser get this kit.

You will save 50% or more going with a refurbished vendor just in parts savings alone!

 

If your printer will print: The way to ensure you have a print issue with the fuser is to do a "1/2 page test". Simply set your printer to print a test page and when it grabs the paper and gets into the printer and the paper is under the toner cartridge but not out the fuser turn off the printer. Now open the toner door remove the toner and inspect the paper under the toner. If it looks great with no flaws then the fuser sleeve and pressure roller are the problem.

 

THIS KIT COMES WITH A 30 DAY INSPECTION WARRANTY. INSPECT THE PARTS UPON RECEIPT AND IF THERE IS ANY DAMAGE REPORT IT IMMEDIATELY. UNFORTUNATELY DUE TO INSTALLATION MISTAKES AND MISUSE I CANNOT ACCEPT INSTALLED PARTS FOR THIS KIT. IF YOU FOLLOW THE CD VIDEO INSTRUCTIONS AND WATCH BEFORE YOU DO THE WORK YOU WILL BE SUCCESSFUL IN THE REPAIR!

 

The kit includes the following:

PREMIUM Fixing Assembly (film and heater and frame)

PRESSURE ROLLER (black or orange depending on mfr)

VIDEO INSTRUCTION CD ON YOUR PC

FUSER FILM GREASE

 

Tools required to do work:

Screwdriver - phillips and standard

q-tips and rag for cleaning.

PC to watch video

 

The video is in WMV format and plays on your pc. The video is compatable with Mediaplayer VLC Player Realplayer and any other WMV video player on a Mac or Windows based PC. The video is spoken in clear english. The video eliminates many mistakes and shows you what to do vs trying to read what to do.