Home > Laserjet 2400 2410 2420 2430 >   HP Laserjet 2400 Fuser Service Kit w/ NO directions
	Our Price: $64.95 Availability: Usually Ships in 24 to 48 Hours Product Code: HP2400FUSERKIT

Description Extended Information   HP Laserjet 2400 Fuser Service Kit w/ NO directions   Features FOR SALE IS A PREMIUM QUALITY FUSER REBUILD KIT w/ GREASE TO REPAIR YOUR HP LASERJET 2400. SYMPTOMS OF A BAD FUSER IS IT HAS BEGUN TO GIVE YOU SMEARED PRINTS DUE TO DAMAGE TO THE FUSER SLEEVE OR YOU SEE TEFLON FLAKING OFF ONTO THE PAPER AND HEARING A PAPER CRUNCHING NOISE WHEN PAPER RUNS THROUGH THE FUSER. YOU MAY SEE DAMAGE TO THE HARD BLACK RUBBER PRESSURE ROLLER AS WELL. THIS KIT REBUILDS THE FUSER AND SAVES YOU A LOT OF MONEY! WHEN YOU SEE SUPER CHEAP SLEEVES PLEASE REALIZE THAT THIS IS A PART YOU DO NOT WANT TO BUY INFERIOR PRODUCTS FOR. THE AMOUNT OF WORK TO REPLACE A SLEEVE IS CONSIDERABLE, DON'T FIND YOURSELF IN 1000 PAGES BACK IN THERE WITH ANOTHER TEAR. THIS KIT DOES NOT HAVE DIRECTIONS. AGAIN, THIS HAS NO DIRECTIONS, THERE IS NO SUPPORT ON THIS PART. FIGURE A REBUILT 30DAY WARRANTY FUSER IS 200+ DOLLARS + SHIPPING + RETURNING THE BAD FUSER. SO FIGURE 250+ DOLLARS. NOW CONSIDER SPENDING 1 HOUR YOURSELF AND FOR A FRACTION OF THE COST, DOING THE REBUILD YOURSELF.  IF YOU HAVE CONCERN OF "IS IT REALLY A BAD FUSER?", DO A 1/2 PAGE TEST. PRINT A TEST PAGE AND WHEN THE PRINTER IS PULLING THE PAPER IN BUT BEFORE IT GETS INTO THE FUSER, TURN OFF THE PRINTER. OPEN UP THE CARTRIDGE DOOR, REMOVE THE CARTRIDGE AND INSPECT THE PRINT. IF THE PRINT LOOKS CLEAN AND GOOD, THEN THE FUSER HAS THE PROBLEMS. TO CHECK THE SLEEVE, OPEN THE REAR DOOR AND LOOK AT THE GRAY SLEEVE - LOOKS LIKE A ROLLER AND IF YOU SEE ANY CUTS, TEARS OR TONER BUILDUP ON THE GRAY SLEEVE IT NEEDS TO BE REPLACED. THE FUSER USUALLY GETS DAMAGED FROM IMPROPER PRINTED ITEMS (TRANSPARENCIES), OR LABELS. THE SLEEVE IS THE MOST COMMON ISSUE BUT THERE IS A SMALL CHANCE THE ROLLER UNDER THE SLEEVE (ORANGE COLOR) CAN ALSO GET DAMAGED IF SOMEONE WAS STICKING SHARP OBJECTS INTO THE PRINTER TO CLEAR A JAM. THE KIT INCLUDES THE FOLLOWING NEW PARTS: PREMIUM TEFLON FUSER SLEEVE TEFLON SLEEVE GREASE (SMALL BAG NOT SHOWN) FUSER PRESSURE ROLLER (2400 SERIES) 3 FUSER GEARS (331, 15T, 21T GEAR) THESE PARTS COME WITH A 30 DAY VERIFY ITEMS ARE SHIPPED AND IN PROPER CONDITION. ONCE YOU INSTALL THE PARTS, THE KIT CANNOT BE RETURNED. PLEASE CHECK THE BOX AND THE SLEEVE AND ROLLER UPON RECEIPT FOR ANY SIGNS OF SHIPPING DAMAGE AND I WILL ACCEPT THE RETURN AND SHIP YOU A NEW KIT. AFTER 30 DAYS OR YOU USE THE PARTS, THE KIT IS NON RETURNABLE FOR REFUND.

Related Products... HP Laserjet 2400 2410 2420 2430 P3015 Tray 1 Feed Roller Separation Pad Repair Kit Our Price: $12.95 Add HP Laserjet 2400 2410 2420 2430 Maintenance Kit minus fuser w/ NO directions Our Price: $26.95 Add

 Share your knowledge of this product with other customers... Be the first to write a review.

Browse for more products in the same category as this item: Laserjet 2400 2410 2420 2430

	HP Laserjet 4 4M Fuser Remanufactured with no core return RG5-0454 $89.95
	HP Laserjet 4200 Fuser Repair Kit No Directions $63.95
	HP 2 3 2D 3D II III D Delivery Coupler Assembly $14.95
	HP Laserjet 4200 4300 LEFT COOLING FAN RH7-1573 $23.95
	HP 4 4M Laserjet Ultimate Maintenance Repair Kit w/ Directions $43.95
	HP Laserjet 2100 Deluxe Maintenance Kit w/ NO Instructions $36.95
	HP Laserjet 4100 Groaning Tray Clutch Repair Kit $18.95
	HP Laserjet 2100 Optional Tray 3 Feed Roller Repair Kit $14.95
	HP Laserjet 8100 8150 Ultimate Maintenance Kit $42.95