Save 100 Dollars or more rebuilding the fuser yourself vs paying someone to come and replace the fuser or buy a new fuser.

 

These kits are top notch high quality with upgraded design fuser sleeves that are superior to the original OEM sleeve.

 

This kit is for HP Laserjet 2300 printers that have a good fuser that heats the paper but finding the print quality to be poor due to damage to the sleeve and pressure roller.

 

If you are handy and know how to service printers this is a great value! This kit comes with NO directions, you are buying the repair parts only.

 

The way to ensure you have a print issue with the fuser is to do a "1/2 page test". Simply set your printer to print a test page and when it grabs the paper and gets into the printer and the paper is under the toner cartridge but not out the fuser turn off the printer. Now open the toner door remove the toner and inspect the paper under the toner. If it looks great with no flaws then the fuser sleeve and pressure roller (rides on the other side of the sleeve) is the problem.

 

The fuser repair kit will not correct fusers that do not heat the paper.

 

THIS KIT COMES WITH A 30 DAY INSPECTION WARRANTY. INSPECT THE PARTS UPON RECEIPT AND IF THERE IS ANY DAMAGE REPORT IT IMMEDIATELY. UNFORTUNATELY DUE TO INSTALLATION MISTAKES AND MISUSE I CANNOT ACCEPT INSTALLED PARTS REFUNDS FOR THIS KIT.

 

The kit includes the following new stock parts:

1 - HP LASERJET 2300 FUSER PRESSURE ROLLER (SHINY ROLLER WITH METAL SHAFT)

1 - 2nd generation - BETTER THAN ORIGINAL FUSER FILM SLEEVE FUSER GEARS

FUSER GEAR SET FOR YOUR PRINTER

FUSER FILM GREASE

LATEX GLOVES

 

Tools required to do work:

Screwdriver - phillips and standard

q-tips and rag for cleaning.