Join our mailing list!




(Your shopping cart is empty)

  Home > Color Laserjet 1600 2600 >

HP Color Laserjet 2600 Fuser Rebuild Kit w/ NO Directions
HP Color Laserjet 2600 Fuser Rebuild Kit


 
Our Price: $52.75


Availability:: Usually Ships in 24 to 48 Hours
Product Code: HP2600FUSERKIT

Description Extended Information
 
HP Color Laserjet 2600 Fuser Rebuild Kit w/ NO Directions
Features
  • PREMIUM QUALITY FUSER REBUILD KIT w/ GREASE TO REPAIR YOUR HP COLOR LASERJET 2600.

    SYMPTOMS OF A BAD FUSER IS IT HAS BEGUN TO GIVE YOU SMEARED PRINTS DUE TO DAMAGE TO THE FUSER SLEEVE OR YOU SEE TEFLON FLAKING OFF ONTO THE PAPER AND HEARING A PAPER CRUNCHING NOISE WHEN PAPER RUNS THROUGH THE FUSER. YOU MAY SEE DAMAGE TO THE HARD BLACK RUBBER PRESSURE ROLLER AS WELL.

    THIS KIT REBUILDS THE FUSER AND SAVES YOU A LOT OF MONEY!
  • WHEN YOU SEE SUPER CHEAP SLEEVES PLEASE REALIZE THAT THIS IS A PART YOU DO NOT WANT TO BUY INFERIOR PRODUCTS FOR. THE AMOUNT OF WORK TO REPLACE A SLEEVE IS CONSIDERABLE, DON'T FIND YOURSELF IN 1000 PAGES BACK IN THERE WITH ANOTHER TEAR.

    THIS KIT DOES NOT HAVE DIRECTIONS. AGAIN, THIS HAS NO DIRECTIONS, THERE IS NO SUPPORT ON THIS PART.


  • FIGURE A REBUILT 30DAY WARRANTY FUSER IS 200+ DOLLARS + SHIPPING + RETURNING THE BAD FUSER. SO FIGURE 250+ DOLLARS. NOW CONSIDER SPENDING 1 HOUR YOURSELF AND FOR A FRACTION OF THE COST, DOING THE REBUILD YOURSELF.


  • IF YOU HAVE CONCERN OF "IS IT REALLY A BAD FUSER?", DO A 1/2 PAGE TEST. PRINT A TEST PAGE AND WHEN THE PRINTER IS PULLING THE PAPER IN BUT BEFORE IT GETS INTO THE FUSER, TURN OFF THE PRINTER. OPEN UP THE CARTRIDGE DOOR, REMOVE THE CARTRIDGE AND INSPECT THE PRINT. IF THE PRINT LOOKS CLEAN AND GOOD, THEN THE FUSER HAS THE PROBLEMS. TO CHECK THE SLEEVE, OPEN THE REAR DOOR AND LOOK AT THE GRAY SLEEVE - LOOKS LIKE A ROLLER AND IF YOU SEE ANY CUTS, TEARS OR TONER BUILDUP ON THE GRAY SLEEVE IT NEEDS TO BE REPLACED. THE FUSER USUALLY GETS DAMAGED FROM IMPROPER PRINTED ITEMS (TRANSPARENCIES), OR LABELS. THE SLEEVE IS THE MOST COMMON ISSUE BUT THERE IS A SMALL CHANCE THE ROLLER UNDER THE SLEEVE (ORANGE COLOR) CAN ALSO GET DAMAGED IF SOMEONE WAS STICKING SHARP OBJECTS INTO THE PRINTER TO CLEAR A JAM.


  • THE FOLLOWING IS INCLUDED IN THIS KIT:
    PREMIUM TEFLON FUSER SLEEVE (I PERSONALLY VERIFY EACH SLEEVE PRIOR TO SHIPMENT TO ENSURE YOU GET A PERFECT SLEEVE) THESE SLEEVES ARE THE BEST AVAILABLE FOR YOUR PRINTER. I HAVE FOUND THE BEST VENDORS AND DON'T OFFER TRASH PARTS AS SOME DO ON EBAY. THESE SLEEVES ARE "NIGHT AND DAY" BETTER THAN WHAT YOUR PRINTER HAS CURRENTLY.

  • TEFLON SLEEVE GREASE (SMALL BAG NOT SHOWN)

  • FUSER PRESSURE ROLLER (2600 SERIES)

  • 3 FUSER GEARS (0433, 0438, 19T GEAR)


  • THESE PARTS COME WITH A 30 DAY VERIFY ITEMS ARE SHIPPED AND IN PROPER CONDITION. ONCE YOU INSTALL THE PARTS, THE KIT CANNOT BE RETURNED FOR EXCHANGE.


Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Color Laserjet 1600 2600
www.laserprinterkits.com

 About Us
 
 Privacy Policy
 Send Us Feedback
 
Company Info | Advertising | Product Index | Category Index | Help | Terms of Use
Copyright © laserprinterkits.com. All Rights Reserved.
Built with Volusion