Join our mailing list!




(Your shopping cart is empty)

  Home > Laserjet CP2025 CM2320 >

HP Color Laserjet CP2025 CM2320 Fuser Film Sleeve w/ NO Directions
HP Color Laserjet CP2025 CM2320 Fuser Film Sleeve w/ NO Directions


 
Our Price: $28.75


Availability:: Usually Ships in 24 to 48 Hours
Product Code: HPCP2025SLEEVE

Description Extended Information
 
HP Color Laserjet CP2025 CM2320 Fuser Film Sleeve w/ NO Directions
Features
  • FOR SALE IS A PREMIUM QUALITY FUSER SLEEVE AND GREASE TO REPAIR YOUR HP COLOR LASERJET CP2025 / CM2320.

    SYMPTOMS OF A BAD FUSER FILM SLEEVE IS IT HAS BEGUN TO GIVE YOU SMEARED PRINTS DUE TO DAMAGE TO THE FUSER SLEEVE OR YOU SEE TEFLON FLAKING OFF ONTO THE PAPER AND HEARING A PAPER CRUNCHING NOISE WHEN PAPER RUNS THROUGH THE FUSER.


  • WHEN YOU SEE SUPER CHEAP SLEEVES PLEASE REALIZE THAT THIS IS A PART YOU DO NOT WANT TO BUY INFERIOR PRODUCTS FOR.

    THIS KIT DOES NOT HAVE DIRECTIONS. AGAIN, THIS HAS NO DIRECTIONS, THERE IS NO SUPPORT ON THIS PART.

    FIGURE A REBUILT 30DAY WARRANTY FUSER IS 200+ DOLLARS + SHIPPING + RETURNING THE BAD FUSER. SO FIGURE 250+ DOLLARS.

    NOW CONSIDER SPENDING 1 HOUR YOURSELF AND FOR A FRACTION OF THE COST, DOING THE REBUILD YOURSELF.

    IF YOU HAVE CONCERN OF "IS IT REALLY A BAD FUSER?", DO A 1/2 PAGE TEST. PRINT A TEST PAGE AND WHEN THE PRINTER IS PULLING THE PAPER IN BUT BEFORE IT GETS INTO THE FUSER, TURN OFF THE PRINTER. OPEN UP THE CARTRIDGE DOOR, REMOVE THE CARTRIDGE AND INSPECT THE PRINT. IF THE PRINT LOOKS CLEAN AND GOOD, THEN THE FUSER HAS THE PROBLEMS. TO CHECK THE SLEEVE, OPEN THE REAR DOOR AND LOOK AT THE GRAY SLEEVE - LOOKS LIKE A ROLLER AND

    IF YOU SEE ANY CUTS, TEARS OR TONER BUILDUP ON THE GRAY SLEEVE IT NEEDS TO BE REPLACED. THE FUSER USUALLY GETS DAMAGED FROM IMPROPER PRINTED ITEMS (TRANSPARENCIES), OR LABELS. THE SLEEVE IS THE MOST COMMON ISSUE BUT THERE IS A SMALL CHANCE THE ROLLER UNDER THE SLEEVE (ORANGE COLOR) CAN ALSO GET DAMAGED IF SOMEONE WAS STICKING SHARP OBJECTS INTO THE PRINTER TO CLEAR A JAM.


  • INCLUDED IS THE FOLLOWING NEW PARTS:

  • PREMIUM TEFLON FUSER SLEEVE (I PERSONALLY VERIFY EACH SLEEVE PRIOR TO SHIPMENT TO ENSURE YOU GET A PERFECT SLEEVE) THESE SLEEVES ARE THE BEST AVAILABLE FOR YOUR PRINTER.
    THESE SLEEVES ARE "NIGHT AND DAY" BETTER THAN WHAT YOUR PRINTER HAS CURRENTLY.
  • TEFLON SLEEVE GREASE (SMALL BAG NOT SHOWN)


  • THESE PARTS COME WITH A 30 DAY VERIFY ITEMS ARE SHIPPED AND IN PROPER CONDITION. ONCE YOU INSTALL THE PARTS, THE KIT CANNOT BE RETURNED. PLEASE CHECK THE BOX AND THE SLEEVE AND ROLLER UPON RECEIPT FOR ANY SIGNS OF SHIPPING DAMAGE AND I WILL ACCEPT THE RETURN AND SHIP YOU A NEW KIT. AFTER 30 DAYS OR YOU USE THE PARTS, THE KIT IS NON RETURNABLE FOR EXCHANGE.

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Laserjet CP2025 CM2320
www.laserprinterkits.com

 About Us
 
 Privacy Policy
 Send Us Feedback
 
Company Info | Advertising | Product Index | Category Index | Help | Terms of Use
Copyright © laserprinterkits.com. All Rights Reserved.
Built with Volusion