Join our mailing list!




(Your shopping cart is empty)

  Home > Laserjet 2400 2410 2420 2430 >

HP Laserjet 2400 2410 2420 2430 Fuser Service Kit w/ NO directions
HP Laserjet 2400 Fuser Service Kit


 
Our Price: $38.75


Availability:: Usually Ships in 24 to 48 Hours
Product Code: HP2400FUSERKIT

Description Extended Information
 
HP Laserjet 2400 Fuser Service Kit w/ NO directions
Features
  • FOR SALE IS A PREMIUM QUALITY FUSER REBUILD KIT w/ GREASE TO REPAIR YOUR HP LASERJET 2400 / 2410 / 2420 / 2430 SERIES FUSERS (D, N, DN, TN etc)

    SYMPTOMS OF A BAD FUSER IS IT HAS BEGUN TO GIVE YOU SMEARED PRINTS DUE TO DAMAGE TO THE FUSER SLEEVE OR YOU SEE TEFLON FLAKING OFF ONTO THE PAPER AND HEARING A PAPER CRUNCHING NOISE WHEN PAPER RUNS THROUGH THE FUSER.

    YOU MAY SEE DAMAGE TO THE HARD BLACK RUBBER PRESSURE ROLLER AS WELL. THIS KIT REBUILDS THE FUSER AND SAVES YOU A LOT OF MONEY!
  • WHEN YOU SEE SUPER CHEAP SLEEVES PLEASE REALIZE THAT THIS IS A PART YOU DO NOT WANT TO BUY INFERIOR PRODUCTS FOR. THE AMOUNT OF WORK TO REPLACE A SLEEVE IS CONSIDERABLE, DON'T FIND YOURSELF IN 1000 PAGES BACK IN THERE WITH ANOTHER TEAR.

    THIS KIT DOES NOT HAVE DIRECTIONS. AGAIN, THIS HAS NO DIRECTIONS, THERE IS NO SUPPORT ON THIS PART.

    FIGURE A REBUILT 30DAY WARRANTY FUSER IS 200+ DOLLARS + SHIPPING + RETURNING THE BAD FUSER. SO FIGURE 250+ DOLLARS. NOW CONSIDER SPENDING 1 HOUR YOURSELF AND FOR A FRACTION OF THE COST, DOING THE REBUILD YOURSELF.

     IF YOU HAVE CONCERN OF "IS IT REALLY A BAD FUSER?", DO A 1/2 PAGE TEST. PRINT A TEST PAGE AND WHEN THE PRINTER IS PULLING THE PAPER IN BUT BEFORE IT GETS INTO THE FUSER, TURN OFF THE PRINTER. OPEN UP THE CARTRIDGE DOOR, REMOVE THE CARTRIDGE AND INSPECT THE PRINT. IF THE PRINT LOOKS CLEAN AND GOOD, THEN THE FUSER HAS THE PROBLEMS.

    TO CHECK THE SLEEVE, OPEN THE REAR DOOR AND LOOK AT THE GRAY SLEEVE - LOOKS LIKE A ROLLER AND IF YOU SEE ANY CUTS, TEARS OR TONER BUILDUP ON THE GRAY SLEEVE IT NEEDS TO BE REPLACED. THE FUSER USUALLY GETS DAMAGED FROM IMPROPER PRINTED ITEMS (TRANSPARENCIES), OR LABELS. THE SLEEVE IS THE MOST COMMON ISSUE BUT THERE IS A SMALL CHANCE THE ROLLER UNDER THE SLEEVE (ORANGE COLOR) CAN ALSO GET DAMAGED IF SOMEONE WAS STICKING SHARP OBJECTS INTO THE PRINTER TO CLEAR A JAM.


  • THE KIT INCLUDES THE FOLLOWING NEW PARTS:

  • PREMIUM TEFLON FUSER SLEEVE
    TEFLON SLEEVE GREASE (SMALL BAG NOT SHOWN)

  • FUSER PRESSURE ROLLER (2400 SERIES)

  • 3 FUSER GEARS (331, 15T, 21T GEAR)


  • THIS FUSER COMES FROM A USA BASED COMPANY THAT IS ISO9001/14001 CERTIFIED THAT MAKES AND TESTS ALL THEIR MANUFACTURED PARTS.  SEE WHY 18,000+ CUSTOMERS RELY ON LASERPRINTERKITS FOR THEIR PRINTER REPAIR PART NEEDS!

    THESE PARTS COME WITH A 30 DAY VERIFY ITEMS ARE SHIPPED AND IN PROPER CONDITION. ONCE YOU INSTALL THE PARTS, THE KIT CANNOT BE RETURNED. PLEASE CHECK THE BOX AND THE SLEEVE AND ROLLER UPON RECEIPT FOR ANY SIGNS OF SHIPPING DAMAGE AND I WILL ACCEPT THE RETURN AND SHIP YOU A NEW KIT. AFTER 30 DAYS OR YOU USE THE PARTS, THE KIT IS NON RETURNABLE FOR REFUND.

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Laserjet 2400 2410 2420 2430
www.laserprinterkits.com

 About Us
 
 Privacy Policy
 Send Us Feedback
 
Company Info | Advertising | Product Index | Category Index | Help | Terms of Use
Copyright © laserprinterkits.com. All Rights Reserved.
Built with Volusion