This kit is for HP Laserjet 6P / 6MP printers that have a good fuser that heats the paper but finding the print quality to be poor due to damage to the sleeve and pressure roller.  Some times owners of this printer will see little pieces of rubber coming out of the printer on the page, a sign of a damaged pressure roller.  Others may notice that hte printer sounds like wrinkled paper as it motors up, a sign of the fuser sleeve being damaged.

 

The way to ensure you have a print issue with the fuser is to do a "1/2 page test". Simply set your printer to print a test page and when it grabs the paper and gets into the printer and the paper is under the toner cartridge but not out the fuser turn off the printer. Now open the toner door remove the toner and inspect the paper under the toner. If it looks great with no flaws then the fuser sleeve and rollers are the problem. Some printers will sound like wrinkling paper when the sleeve is damaged as the printer operates.

 

The fuser repair kit will not correct fusers that do not heat the paper or if you have a damaged pressure roller that rides under the sleeve.

 

THIS KIT COMES WITH A 30 DAY INSPECTION WARRANTY. INSPECT THE PARTS UPON RECEIPT AND IF THERE IS ANY DAMAGE REPORT IT IMMEDIATELY. UNFORTUNATELY DUE TO INSTALLATION MISTAKES AND MISUSE WE CANNOT ACCEPT RETURNS OR EXCHANGES ON INSTALLED PARTS FOR THIS KIT.

 

The kit includes the following:

PREMIUM FUSER FILM SLEEVE

PRESSURE ROLLER (BLACK OR ORANGE DEPENDING ON MFR)

FUSER FILM GREASE
Fuser Drive Gears

** No directions are provided for this kit**